|
Description:
superblock series combines advantages of the latest refrigeration technologies as well as traditional effective solutions.
Each model has been designed to work under extreme ambient conditions with minimum maintenance needs.
superblock units are environmentally friendly: they provide the installation with high performance, a low ecological refrigerant load in an hermetic refrigeration circuit and low noise emission rate.
ACH-NF series: High temperature, from 6,8 to 65,8 kW (12ºC / 35ºC). Hermetic reciprocating compressor.
ACH-SF series: Positive temperature, from 22,9 to 65,4 kW (12ºC / 35ºC). Scroll compressor.
MCH-NF series: Positive temperature, from 4,6 to 42,1 kW (0ºC / 35ºC). Hermetic reciprocating compressor.
MCH-SF series: Positive temperature, from 15,5 to 42,8 kW (0ºC / 35ºC). Scroll compressor.
HCH-NF series: High humidity, from 5,0 to 26,2 kW (0ºC, 95% RH / 35ºC). Hermetic reciprocating compressor.
HCH-SF series: High humidity, from 16,0 to 29,2 kW (0ºC, 95% RH / 35ºC). Scroll compressor.
BCH-NF series: Negative temperature, from 3,4 to 20,6 kW (-20ºC / 35ºC). Hermetic reciprocating compressor.
BCH-SF series: Negative temperature, from 8,2 to 26,0 kW (-20ºC / 35ºC). Scroll compressor.
Technical features:
- 400V-III-50Hz power supply.
- R404-A refrigerant.
- Hermetic reciprocating or Scroll compressors, acoustic isolated, with compressor discharge muffler, mounted on shock absorbers, with internal klixon and crankcase heater.
- Large surface condensing coil, in copper pipes and aluminium fins, tropicalised for ambient temperature up to 45ºC.
- High efficiency evaporating coil, in copper pipes and aluminium fins, with 5mm pitch between fins. Stainless steel drain tray.
- Low-speed motorfans, with internal electronic protection, mounted on nozzles, dynamically balances blades and external protection grille.
- Proportional control of condensation temperature by fan speed control.
- Refrigeration circuit equipped with high and low pressure switches and ceramic filter drier.
- Defrosting by heater cables imbricated in coil (MCH, HCH and BCH series), air defrosting (ACH series).
- Full electrical and power panel, with contactor and fuses for compressor and heaters.
- Multifunctional electronic control with remote control keyboard.
- Removable through-wall pad in injected polyurethane with a 45 kg/m3 density.
Optional:
- Hot gas defrosting.
- Anticorrosion coil coating.
- Made-on-measure extension structure for trough-wall assembly.
- Optional module for external communication through ModBus protocol and RS485 connection.
- Long distance air streamer in 1000, 3000 and 4000 models.
- Evaporator motorfans with power enough to provide an available pressure of 80 Pa suitable for textile ducts.
|
