intarCUBE Compact air-cooled DX plants

Hermetic and scroll compressors

Self-contained air-cooled condensing units and refrigeration DX plants, from 1 to 3 compressors, with axial condensing, for positive and negative temperature applications, featuring control and power board (depending on the version).

Semihermetic compressors

DX compact air condensation units and DX refrigeration plants, from 1 to 2 compressors, with axial fan and condensation pressure control, for positive and negative temperature applications, electrical panel with control board and power.

  • Axial fans for outdoor installation.
  • Centrifugal fans for indoor installation in technical rooms.
  • Very compact design.

Centrifugal version

intarCUBE centrifugal fans are assembled for vertical fan discharge with front
and bi-side maintenance access. Centrifugal fans assembled for horizontal discharge are optional in these units.

Axial version

intarCUBE axial, is design for installation outdoors, using a minimum foot print.
As standard, intarCUBE axial units are assembled with air separation and a tropicalised condensing coil.

 

Hermetic and scroll compressors

  • 400 V-III-50 Hz power supply.
  • Hermetic (reciprocating or scroll) compressors, acoustic insulation, with rotalock service valves, discharge muffler (for reciprocating compressor models), mounted on antivibration pads, internal klixon and crankcase heater.
  • Condenser coil made of copper pipes and aluminium fins.
  • Axial variable speed fan condensation control by voltage variation.
  • Refrigeration circuit equipped with high and low pressure switches, ceramic dryer filter, liquid receiver and sight gauge.
  • Full control and power panel, with differential switch proteccion for each compressor (in units with 2 or more compressors) and for each motor fan (in units with 2 motor fans), MCB switch for compressor/s and motor fan/s, and electronic control (depending on the version).
  • Liquid injection system for negative temperature models with R449A.
  • Fan for cooling the control panel (axial series 6, 7 and 8).

Semihermetic compressors

  • 400 V-III-50 Hz power supply.
  • Semihermetic compressors Copeland Stream, with rotalock service valves, mounted on shock absorbers, discharge muffler, with internal klixon and crankcase heater.
  • Condenser coil with copper pipes and aluminium fins.
  • Axial fans with proportional condensation control by voltage variation for series 5, 6 and 7.
  • Refrigeration circuit equipped with high and low pressure switches, ceramic dryer filter, liquid receiver and sight glass.
  • Full control and power panel, with differential switch for each compressor (in 2 or more compressors units) and for each motor fan (in 2 motor fans units), MCB switch for compressor/s and motor fan/s, and electronic regulation (depending on the version).
  • Fan for cooling the control panel (axial series 6 and 8).
  • Axial fans with condensation pressure control by pressure switch for series 8.

Hermetic and scroll compressors

  • VRC system for cooling capacity modulation for hermetic compressors, or Digital system for scroll compressors.
  • Oil separator.
  • Anti-corrosion coil coating.
  • Automatic emergency maneuver.
  • Discharge check valve.
  • Low voltage and phase change protection.
  • Heat recovery.
  • Electronic EC fans (series 6, 7 and 8).
  • Centrifugal fans (series 5, 6, 7 and 8).

Semihermetic compressors

  • Anti-corrosion coil coating.
  • Automatic emergency maneuver.
  • Discharge check valve.
  • Low voltage and phase change protection.
  • Heat recovery.
  • Air section separation panel.
  • Centrifugal or radial fans (series 6, and 8).